[zfs-discuss] Re: ZFS not auto-mounting on Ubuntu

Greg retheoff at gmail.com
Mon May 7 14:35:01 EDT 2012


Did you install the "mountall" package from the PPA?  I had to install that
too.  Make sure when you install it, it shows as zfs:
2.36-zfs1

Greg




On Mon, May 7, 2012 at 11:20 AM, Vahe Avedissian <vahe at robotics.stanford.edu
> wrote:

> Do you have ubuntu configured with systemd? If so, your pool will not auto
> mount after reboot.
>
> Vahe
>
> On Monday, May 07, 2012 06:14:30 AM Shamus Rask wrote:
> > Doing a little further digging in the hopes there may be something
> > helpful here, when I do an fdisk /dev/sda (one of the 2 HDDs) and
> > print the partiton table, I see:
> >
> >    Device Boot      Start         End      Blocks   Id  System
> > /dev/sda1               1  4294967295  2147483647+  ee  GPT
> >
> > Same for other HDD.
> >
> > On May 7, 7:31 am, Shamus Rask <sha... at srask.ca> wrote:
> > > No typo there... did obscure the disk id part. These were 2 brand new,
> > > freshly-installed, never used-before drives.
> > >
> > > Should I try destroying the pool, forcibly blanking the disks and re-
> > > doing?
> > >
> > > On May 6, 10:40 pm, Darik Horn <dajh... at vanadac.com> wrote:
> > > > On Sun, May 6, 2012 at 9:07 PM, Shamus Rask <sha... at srask.ca> wrote:
> > > > > /dev/disk/by-id/<by-=id-1> does not contain an EFI label but it may
> > > > > contain partition information in the MBR.
> > > >
> > > > Did you typo while obfuscating the result, or did you actually get
> > > > that from the zpool command?
> > > >
> > > > If you need to use the `-f` switch, then the disks are not empty.
> > > > Completely clear the disks and try again.
> > > >
> > > > --
> > > > Darik Horn <dajh... at vanadac.com>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.zfsonlinux.org/pipermail/zfs-discuss/attachments/20120507/f6a758ef/attachment.html>


More information about the zfs-discuss mailing list