[zfs-discuss] (no subject)

Gandalf Corvotempesta gandalf.corvotempesta at gmail.com
Wed Nov 14 11:43:59 EST 2018


I'm still getting these errors on a node:

# zpool status
  pool: rpool
 state: ONLINE
status: One or more devices has experienced an unrecoverable error.  An
attempt was made to correct the error.  Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
using 'zpool clear' or replace the device with 'zpool replace'.
   see: http://zfsonlinux.org/msg/ZFS-8000-9P
  scan: scrub in progress since Sun Nov 11 00:24:03 2018
    2.34T scanned out of 9.06T at 7.63M/s, 256h40m to go
    0 repaired, 25.81% done
config:

NAME        STATE     READ WRITE CKSUM
rpool       ONLINE       0     0     0
  raidz2-0  ONLINE       0     0     2
    sda2    ONLINE       0     0     1
    sdb2    ONLINE       0     0     3
    sdc2    ONLINE       0     0     1
    sdd2    ONLINE       0     0     2
    sde2    ONLINE       0     0     2
    sdf2    ONLINE       0     0     2

errors: No known data errors



But I don't see any error in SMART:

# smartctl -a /dev/sda -d megaraid,1
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.17-3-pve] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Re
Device Model:     WDC WD2004FBYZ-01YCBB1
Serial Number:    WD-WMC6N0D4R85N
LU WWN Device Id: 5 0014ee 00434cfa6
Firmware Version: RR03
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Wed Nov 14 17:42:55 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART Status not supported: ATA return descriptor not supported by
controller firmware
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 241) Self-test routine in progress...
10% of test remaining.
Total time to complete Offline
data collection: (  219) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: (   2) minutes.
Extended self-test routine
recommended polling time: ( 219) minutes.
Conveyance self-test routine
recommended polling time: (   5) minutes.
SCT capabilities:        (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail
Always       -       0
  3 Spin_Up_Time            0x0027   183   182   021    Pre-fail
Always       -       3850
  4 Start_Stop_Count        0x0032   100   100   000    Old_age
Always       -       33
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail
Always       -       0
  7 Seek_Error_Rate         0x002e   100   200   000    Old_age
Always       -       0
  9 Power_On_Hours          0x0032   072   072   000    Old_age
Always       -       20600
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age
Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age
Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age
Always       -       33
 16 Unknown_Attribute       0x0022   006   194   000    Old_age
Always       -       325643595621
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age
Always       -       0
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age
Always       -       31
193 Load_Cycle_Count        0x0032   200   200   000    Old_age
Always       -       181
194 Temperature_Celsius     0x0022   113   107   000    Old_age
Always       -       34
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age
Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age
Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age
Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age
Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age
Offline      -       0

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining
LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Self-test routine in progress 10%         0         -
# 2  Short offline       Completed without error       00%     20500         -
# 3  Short offline       Completed without error       00%     20476         -
# 4  Short offline       Completed without error       00%     20452         -
# 5  Short offline       Completed without error       00%     20428         -
# 6  Short offline       Completed without error       00%     20411         -
# 7  Short offline       Completed without error       00%     20384         -
# 8  Short offline       Completed without error       00%     20364         -
# 9  Short offline       Completed without error       00%     20333         -
#10  Short offline       Completed without error       00%     20315         -
#11  Short offline       Completed without error       00%     20287         -
#12  Short offline       Completed without error       00%     20261         -
#13  Short offline       Completed without error       00%     20248         -
#14  Short offline       Completed without error       00%     20218         -
#15  Short offline       Completed without error       00%     20197         -
#16  Short offline       Completed without error       00%     20168         -
#17  Short offline       Completed without error       00%     20143         -
#18  Short offline       Completed without error       00%     20119         -
#19  Short offline       Completed without error       00%     20093         -
#20  Short offline       Completed without error       00%     20069         -
#21  Extended offline    Interrupted (host reset)      10%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


More information about the zfs-discuss mailing list